1.2 Customer Service
1.2.1 Maintenance contents
In accordance with the ESE 220 service interval, to be performed every 1000 service
hours, but at least once a year.
1.2.1.1 Standard equipment
Brakes
Test the function of the brakes
Measure the air gap of the magnetic brake.
Electrical system
Test the contactors and/or relays.
Carry out a chassis insulation-resistance test.
Clean the motor (engine?) with compressed air.
Chassis/structure
Check that the panels and covers as well as the floor plate with mounting brackets are
secure. Ensure that they function correctly and are safe.
Hydraulic operations
Test the function of the lift-limit cut-off/lift cut-off.
Adjust the lift mechanism.
Correct the hydraulic oil level.
Test the pressure relief valve.
Agreed services
Carry out a test run with the rated load or a customer-specific load.
Demonstration after maintenance.
Lubricate truck according to the lubrication diagram.
130
04.19 en-GB
To Next Page
Loading...
Need help?
General
