Jungheinrich ESE 220 User Manual

6 Checking the battery acid level
43
47
48
ESE 220
Checking the battery acid level
Requirements
– Park the truck securely, see page 60.
– Expose the battery, see page 36.
Procedure
• Remove the battery connector (43) from the truck.
• Place the battery connector (43) on the battery (48).
• Pull the battery lock (47) up.
CAUTION!
Unsecured battery
An unsecured battery can result in trapping and injury
u
Wear safety shoes when removing and installing the battery.
u
Do not reach between the battery and the chassis.
• Pull the battery (48) half way off the truck.
• Release the battery lock (47).
• Keep pulling the battery (48) out of the truck until the lock engages on the battery
again.
44
04.19 en-GB

Jungheinrich ESE 220 Specifications

General

Brand	Jungheinrich
Model	ESE 220
Category	Trucks
Language	English