3 Approved application conditions
– Operation in industrial and commercial environments.
– Permissible temperature range 5°C to 40°C.
– Operation only on secure, level surfaces with sufficient capacity.
– Do not exceed the permissible surface and point loading on the travel paths.
– Operation only on travel paths that are clearly visible and approved by the
operating company.
– Negotiating slopes up to a maximum of 13 % (without load).
– Do not travel across or at an angle on slopes. Transporting with the load facing
uphill.
– Operation in partially public traffic.
WARNING!
Use under extreme conditions
Using the truck under extreme conditions can result in malfunctions and accidents.
u
Special equipment and authorisation are required if the truck is to be constantly
used in extreme conditions, especially in dusty or corrosive atmospheres.
u
The truck cannot be used in areas at risk of explosion.
u
In adverse weather conditions (thunder, lightning) the industrial truck must not be
operated outside or in endangered areas.
12
04.19 en-GB