Juniper ACX7024 - In this Section; Syntax (ACX7024); Hierarchy Level | 19

Descripon
The PTP mode conguraon is mandatory to enable the PTP ordinary clock feature in ACX7024.
When you enable PTP mode, the system disables one of the ports that are used for data trac. For example, on
ACX7024, when you enable PTP mode, port 27 is disabled.
For more informaon about valid port conguraons on ACX7024 router, see Port Speed on ACX7024 Router.
Required Privilege Level
interface—To view this statement in the conguraon.
interface-control—To add this statement to the conguraon.
gnss-receiver
IN THIS SECTION
Syntax (ACX7024) | 18
Hierarchy Level | 19
Descripon | 19
Opons | 19
Required Privilege Level | 20
Syntax (ACX7024)
gnss-receiver {
cable-delay-compensation;
constellation {
galileo (e1);
glonass (l1of);
gps (l1ca);
qzss (l1ca);
}
interface;
18