Juniper ACX7024 - Page 30

Table 4: show chassis synchronizaon gnss-receiver extensive Output Fields (Connued)
Field Name Field Descripon
Constellation
Satellite constellaon that GNSS detects and locks to.
Position mode
Posion modes of the GNSS receiver.
Self Survey Length
Duraon for which the GNSS receiver can survey its own posion before moving to posion-x-
mode. The Self-survey length is specied in minutes.
Cable Delay Compensation
Indicates the me duraon to compensate the delay introduced due to RF cable which is routed
from the antenna to TB1 RF input. Cable delay compensaon is specied in nanoseconds.
Latitude
GNSS receiver's latude in degree minutes.
Longitude
GNSS receiver's longitude in degree minutes.
Altitude
GNSS receiver's altude in meters.
No. of Satellites Used
Number of satellites are used for posion and me soluons.
Visible Satellite List
The current tracking satellite number, its signal strength in dBHz, and the constellaon to which the
satellite belongs.
Sample Output
show chassis synchronizaon gnss-receiver extensive
user@host> show chassis synchronization gnss-receiver extensive
Lock status : warmup / pull-in / coarse-lock / fine-lock / holdover / out of holdover
Receiver-type : TB-1
Port Status : Up / Down
Port Details : UART 9600 bps / USB
Current ToD : 05:02:15 29/11/2019
UTC Pending : FALSE
UTC offset (TAI-UTC) : 37
Future leap sec & schedule : -99/+99 date and Time
30