Juniper CTP2000 Series Hardware Guide

Table 8: CTP2008 Platform Specifications (continued)
SpecificationCategory
144 WPower
2 independent line feedsRedundancy (input power)
AC Input
100–240 VACPower required
50–60 HzAC line frequency
2.0Nominal current (115V amps)
200 WPower
3 ft. (90 cm) behind device or rack.
Do not block air vents on the front or back of the device.
Space Requirements
Air intake occurs from the front of the device.
Air is exhausted out the back of the device.
Airflow
•
AS/NZS 60950:2000 Safety of Information Technology Equipment
•
CAN/CSA-C22.2, No. 60950-1–03, First Edition, Information Technology
Equipment - Safety - Part 1: General Requirements
•
EN60825-1, Safety of Laser Products - Part 1: Equipment Class,
Requirements, and User's Guide (2001)
•
IEC 60950-1(2001-10) Ed. 1.0 Information Technology Equipment - Safety
- Part 1: General Requirements
•
Low Voltage Directive (2006/95/EC)
•
UL 60950-1, First Edition, Information Technology Equipment - Safety -
Part 1: General Requirements
Safety Agency Certification
34

Juniper CTP2000 Series Specifications

General

Brand	Juniper
Model	CTP2000 Series
Category	Network Hardware
Language	English