Juniper CTP2000 Series - Install Modules and Components; Protect Modules and Slots

Installing Modules | 93
CTP2000 Modules Installation Overview | 93
Protecting CTP2000 Modules and Slots | 94
Required Tools and Safety Items for Installing CTP Modules | 95
Installing a CTP Interface Module, Processor Module, or Clock Module | 95
Removing a CTP Interface Module, Processor Module, or Clock Module | 96
Installing or Removing a CTP2000 Series CompactFlash Card | 98
Installing a PMC on CTP2000 Platforms | 99
Installing and Removing SFPs in a CTP Module | 102
Installing SFPs in a CTP2000 Module | 102
Removing SFPs in a CTP2000 Module | 104
Upgrading Components for Memory Upgrades | 106
Upgrading CTP2000 Series Components for Memory Upgrades | 106
Cabling | 108
Cabling the CTP2000 Platform Overview | 108
Required Tools, Wires, and Cables for the CTP2000 Platform | 109
CTP2000 Management Ports | 110
Cabling a CTP2000 T1/E1 Interface Module | 111
Cabling the CTP Platform for DC Power | 111
Task 1: Turning Off All CTP Platform Power | 112
Task 2: Connecting the Grounding Cable to the CTP Platform (CTP2056 Platform Only) | 112
Task 3: Connecting the Power Cables to the CTP2000 Platform | 113
Powering On | 115
Before You Power On the CTP2000 Platform | 115
Powering On the CTP2000 Platform | 116
Powering Off the CTP Platform | 119
vi