To Next Page

To Previous Page

JUNOSe 7.2.x Policy Management Configuration Guide

124 ! Policy Management show Commands

show classifier-list

! Use to display CLACL configurations.

! Use the brief or detail keywords with the show classifier command to display

different levels of information.

! Field descriptions—Fields displayed vary depending on the type and

configuration of the CLACL:

! Reference count—Number of times the CLACL is referenced by policies

! Entry count—Number of entries in the classifier list

! Classifier-List—Name of the classifier list

! Entry—Entry number of the classifier list rule

! Color—Packet color to match: green, yellow, or red

! Protocol—Protocol type

! Not Protocol—If true, matches any protocol except the preceding protocol;

if false, matches the preceding protocol

! Source IP Address—Address of the network or host from which the packet

is sent

! Source IP WildcardMask—Mask that indicates addresses to be matched

when specific bits are set

! Not Source Ip Address—If true, matches any source IP address and mask

except the preceding source IP address and mask; if false, matches the

preceding source IP address and mask

! Destination IP Address—Number of the network or host from which the

packet is sent

! Destination IP WildcardMask—Mask that indicates addresses to be

matched when specific bits are set

! Not Destination Ip Address—If true, matches any destination IP address

and mask except the preceding destination IP address and mask; if false,

matches the preceding destination IP address and mask

! Traffic Class—Name of the traffic class to match

! User Packet Class—User packet value to match

! DS Field—DS field value to match

! TOS Byte—ToS value to match

! Precedence—Precedence value to match

! User Priority bits—User priority bits value to match

! Traffic Class Field—Traffic class field value to match

! EXP Bits—MPLS EXP bit value to match

! EXP Mask—Mask applied to EXP bits before matching

! DE Bit—Frame Relay DE bit value to match

! Destination Route Class—Route class used to classify packets based on the

packet’s destination address

Brand	Juniper
Model	E Series
Category	Network Router
Language	English

Juniper E Series Configuration Guide

Table of Contents

Other manuals for Juniper E Series

Questions and Answers:

Juniper E Series Specifications

Related product manuals