Juniper E Series

Policy Management show Commands ! 125
Chapter 5: Monitoring Policy Management
! Source Route Class—Route class used to classify packets based on the
packet’s source address
! Local—If true, matches packets destined to a local interface; if false,
matches packets that are traversing the router
! Example 1—Displays a list of CLACLs
host1#show classifier-list
Classifier Control List Table
---------- ------- ---- -----
GRE Tunnel greClass.1
VLAN lowLatencyLowDrop.1
VLAN excellentEffort.1
VLAN bestEffort.1
VLAN lowLatency.1
IP wstFd.1 source-route-class 44 destination-route-class 55 3 any any
IP XYZCorpPermit.1 local true color green ip any any
IP routeForXYZCorp.1 color red tcp any any
IP XYZCorpIcmpEchoRequests.1 ip any any
IP XYZCorpPrecedence.1 tcp any any tos 5
IP XYZCorpPrecedence67.1 udp any any
IPv6 IPv6Precedence.1 color yellow
IPv6 IPv6Precedence67.1
L2TP l2tpclass.1 color green user-packet-class 8
MPLS mplsClass.1 user-packet-class 10 exp-bits 3 exp-mask 7
Frame relay frMatchDeSet.7 user-packet-class 8 de-bit 0
! Example 2—Displays details of each CLACL
host1#show classifier-list detailed
Classifier Control List Table
---------- ------- ---- -----
IP Classifier Control List XYZCorpPermit
Reference count: 1
Entry count: 1
Classifier-List XYZCorpPermit Entry 1
Color: green
Protocol: ip
Not Protocol: false
Source IP Address: 0.0.0.0
Source IP WildcardMask: 255.255.255.255
Not Source Ip Address: false
Destination IP Address: 0.0.0.0
Destination IP WildcardMask:255.255.255.255
Not Destination Ip Address: false
GRE Tunnel Classifier Control List greClass
Reference count: 0
Entry count: 2
Classifier-List greClass Entry 1
User Packet Class: 8
DS Field: 3
Classifier-List greClass Entry 2
Color: yellow
VLAN Classifier Control List bestEffort
Reference count: 0
Entry count: 1