JUNOSe 7.2.x Policy Management Configuration Guide
190 ! Monitoring Packet Mirroring
show radius servers
! Use to display RADIUS dynamic-request server configuration information and
statistics.
! Field descriptions
! IP Address—IP address of the RADIUS server
! Udp Port—Port on which the router listens for RADIUS server
! Disconnect—Status of RADIUS-initiated disconnect feature, enabled or
disabled
! Change of Authorization—Status of change of authorization feature,
enabled or disabled
! Secret—Secret (key) used to connect to RADIUS server
! Disconnect or CoA Requests—Number of RADIUS-initiated disconnect or
CoA requests received
! Disconnect or CoA Accepts—Number of RADIUS-initiated disconnect or
CoA requests accepted
! Disconnect or CoA Rejects—Number of RADIUS-initiated disconnect or
CoA requests rejected
! Disconnect or CoA No Session ID—Number of RADIUS-initiated disconnect
or CoA messages rejected because the request did not include a session ID
attribute
! Disconnect or CoA Bad Authenticators—Number of RADIUS-initiated
disconnect or CoA messages rejected because the calculated authenticator
in the authenticator field of the request did not match
! Disconnect or CoA Packets Dropped—Number of RADIUS-initiated
disconnect or CoA packets dropped because of queue overflow
! No Secret—Number of messages rejected because a secret was not present
in the authenticator field
! Unknown Request—Number of packets received with an invalid RADIUS
code for RADIUS disconnect or change of authorization
! Invalid Addresses Received—Number of invalid addresses received
! Example 1
host1#show radius dynamic-request servers
RADIUS Request Configuration
----------------------------
Change
Udp Of
IP Address Port Disconnect Authorization Secret
------------- ---- ---------- ------------- ------
192.168.2.3 1700 disabled disabled <NULL>
10.10.120.104 1700 disabled disabled mysecret