Juniper E Series

JUNOSe 7.2.x Policy Management Configuration Guide
192 ! Monitoring Packet Mirroring
! Example
host1#show secure policy-list
Policy Table
------ -----
Secure IP Policy secureIpPolicy
Administrative state: enable
Reference count: 2
Classifier control list: *
mirror analyzer-ip-address 192.168.1.1 analyzer-virtual-router default
analyzer-udp-port 3000 mirror-id 6789 session-id 6543
Referenced by interface(s):
ATM5/0.1 secure-input policy, statistics disabled, virtual-router
default
ATM5/0.1 secure-output policy, statistics disabled, virtual-router
default
L2TP Secure Policy secureL2tpPolicy
Administrative state: enable
Reference count: 2
Classifier control list: *
mirror analyzer-ip-address 192.168.2.1 analyzer-virtual-router default
analyzer-udp-port 3000 mirror-id 6789 session-id 6543 (unreachable)
Referenced by interface(s):
TUNNEL l2tp:1/msn.pwh.com/1 secure-input policy, statistics disabled
TUNNEL l2tp:1/msn.pwh.com/1 secure-output policy, statistics disabled