Juniper EX2200-C - User Manual

Quick Start Guide
EX2200-C
IN THIS GUIDE
Step 1: Begin | 1
Step 2: Up and Running | 4
Step 3: Keep Going | 6
Step 1: Begin
IN THIS SECTION
Mount the EX2200-C on Two Posts of a Rack | 2
Mount the EX2200-C on a Desk or Other Level Surface | 3
Connect Power to the EX2200-C | 3
To install and perform initial configuration of a Juniper Networks EX2200-C Ethernet Switch, the compact, fanless model,
you need:
For rack installation:
•
Two mounting brackets and eight mounting screws (separately orderable)
•
Screws to secure the chassis to the rack (not provided)
•
Phillips (+) screwdriver, number 2 (not provided)
For desk installation:
•
Four rubber feet (provided)
For connection to power and initial configuration:

Juniper EX2200-C Specifications

General

Brand	Juniper
Model	EX2200-C
Category	Switch
Language	English

Summary

Installation and Mounting

Mount EX2200-C in Rack

Details the procedure for mounting the EX2200-C switch onto a two-post rack, including required hardware and steps.

Mount EX2200-C on Desk;Surface

Provides instructions for placing and securing the EX2200-C switch on a desk or other level surface.

Connect EX2200-C Power

Explains how to connect the power cord and retainer clip to the EX2200-C switch for operation.

Initial Configuration

Set Console Parameter Values

Specifies required console parameter settings for connecting and configuring the switch via CLI.

Perform Initial Switch Configuration

Guides through the initial setup and configuration of the EX2200-C switch using the Command Line Interface.

Post-Setup and Support

Safety Warnings Summary

Outlines essential safety precautions and warnings for handling and installing the EX2200-C switch.

Contact Juniper Networks Support

Provides information and a link for obtaining technical support for the EX2200-C switch.