Juniper EX9200 Series User Manual

wired-process-mem-size megabytes;
}
}
aggregated-devices {
ima {
device-count number;
}
}
aggregate-ports;
atm-cell-relay-accumulation;
atm-l2circuit-mode (aal5 | cell | trunk trunk);
ce1 {
e1 port-number {
channel-group group-number timeslots slot-number;
}
}
ct3 {
port port-number {
t1 link-number {
channel-group group-number timeslots slot-number;
}
}
}
ethernet {
pic-mode (enhanced-switching | routing | switching);
}
fibre-channel {
port port-number;
port-range port-range-low port-range-high
}
egress-policer-overhead bytes;
forwarding-mode {
sa-multicast;
vlan-steering {
vlan-rule (high-low | odd-even);
}
}
framing (e1 | e3 | sdh | sonet | t1 | t3);
idle-cell-format {
itu-t;
payload-pattern payload-pattern-byte;
}
ingress-policer-overhead bytes;
inline-services {
bandwidth (1g | 10g);
}
linerate-mode;
max-queues-per-interface (4 | 8);
mlfr-uni-nni-bundles number;
no-concatenate;
no-multi-rate;
port port-number {
framing (e1 | e3 | sdh | sonet | t1 | t3);
forwarding-mode {
sa-multicast;
}
27Copyright © 2013, Juniper Networks, Inc.
Chapter 4: Configuration Statements

Juniper EX9200 Series Specifications

General

Brand	Juniper
Model	EX9200 Series
Category	Switch
Language	English