Juniper EX9200 Series - Page 51

(ip-precedence [ precedence-names ] | ip-precedence-except [ precedence-names ]);
(ip-protocol [ protocol-names ] | ip-protocol-except [ protocol-names ]);
ip-source-address ip-prefix</prefix-length>;
(learn-vlan-1p-priority [ priorities ] | learn-vlan-1p-priority [ priorities ]);
(learn-vlan-id [ vlan-ids ] | learn-vlan-id-except [ vlan-ids ]);
(loss-priority [ priorities ] | loss-priority-except [ priorities ]);
(port [ port-names ] | port-except [ port-names ]);
source-mac-address {
mac-address <except>;
}
(source-port [ port-names ] | source-port-except [ port-names ]);
tcp-flags flag;
(traffic-type [ broadcast known-unicast multicast unknown-unicast ] |
traffic-type-except [ broadcast known-unicast multicast unknown-unicast ]);
(user-vlan-1p-priority [ priorities ] | user-vlan-1p-priority [ priorities ]);
(user-vlan-id [ vlan-ids ] | user-vlan-id-except [ vlan-ids ]);
(vlan-ether-type [ protocol-types ] | vlan-ether-type-except [ protocol-types ]);
37Copyright © 2013, Juniper Networks, Inc.
Chapter 4: Configuration Statements