Juniper EX9200 Series

threshold bytes;
}
(traps | no-traps);
unidirectional;
vlan-tagging;
}
interface-name {
unit logical-unit-number {
disable;
accept-source-mac {
mac-address mac-address {
policer {
input policer-name;
output policer-name;
}
}
}
account-layer2-overhead (Interface Level) {
value;
egress bytes;
ingress bytes;
}
accounting-profile name;
advisory-options {
downstream-rate rate;
upstream-rate rate;
}
arp-resp (restricted|unrestricted);
bandwidth rate;
clear-dont-fragment-bit;
copy-tos-to-outer-ip-header;
demux-destination family;
encapsulation (vlan-bridge | vlan-vpls);
epd-threshold cells plp1 cells;
filter filter-name;
inner-vlan-id-range start start-id end end-id;
input-vlan-map {
(pop | pop-pop | pop-swap | push | push-push | swap | swap-push | swap-swap);
inner-tag-protocol-id tpid;
inner-vlan-id number;
tag-protocol-id tpid;
vlan-id number;
}
interface-shared-with psdnumerical-index;
layer2-policer {
input-hierarchical-policer policer-name;
input-policer policer-name;
input-three-color policer-name;
output-policer policer-name;
output-three-color policer-name;
}
multi-chassis-protection peer-ip-address {
interface interface-name;
}
53Copyright © 2013, Juniper Networks, Inc.
Chapter 4: Configuration Statements