Juniper JUNOS OS 10.4

}
}
Router PE2
Configuration
Configure the Layer 2 circuit over aggregated Ethernet on the MX Series router.
[edit]
chassis {
aggregated-devices {
ethernet {
device-count 1;
}
}
}
interfaces {
ge-0/2/0 {
gigether-options {
802.3ad ae0;
}
}
ge-0/2/8 {
unit 0 {
family inet {
address 20.1.1.10/24;
}
family mpls;
}
}
ae0 {
vlan-vci-tagging;
encapsulation vlan-vci-ccc;
unit 0 {
vlan-id 100;
inner-vlan-id-range start 32 end 63;
}
}
}
protocols {
mpls {
interface ge-0/2/8.0;
}
ospf {
area 0.0.0.0 {
interface ge-0/2/8.0;
interface lo0.0 {
passive;
}
}
}
ldp {
interface all;
}
l2circuit {
neighbor 10.255.171.45 {
interface ae0.0 {
virtual-circuit-id 100;
}
Copyright © 2012, Juniper Networks, Inc.84
Junos OS 12.1 MX Series 3D Universal Edge Routers Solutions Guide