Juniper JUNOS OS 10.4 - Router 2 Configuration

control-channel ge-1/0/1.1;
ring-protection-link-end;
}
west-interface {
control-channel ge-1/2/4.1;
}
}
}
}
4. Configure Ethernet OAM:
[edit]
protocols {
oam {
ethernet {
connectivity-fault-management {
action-profile rmep-defaults {
default-action {
interface-down;
}
}
maintenance-domain d1 {
level 0;
maintenance-association 100 {
mep 1 {
interface ge-1/0/1;
remote-mep 2 {
action-profile rmep-defaults;
}
}
}
}
maintenance-domain d2 {
level 0;
maintenance-association 100 {
mep 1 {
interface ge-1/2/4;
remote-mep 2 {
action-profile rmep-defaults;
}
}
}
}
}
}
}
}
Router 2 Configuration
To configure Router 2:
1. Configure the interfaces:
[edit]
Copyright © 2012, Juniper Networks, Inc.150
Junos OS 12.1 MX Series 3D Universal Edge Routers Solutions Guide