Juniper JUNOS OS 10.4 - Router 3 Configuration

maintenance-domain d1 {
level 0;
maintenance-association 100 {
mep 2 {
interface ge-1/2/1;
remote-mep 1 {
action-profile rmep-defaults;
}
}
}
}
maintenance-domain d3 {
level 0;
maintenance-association 100 {
mep 1 {
interface ge-1/0/2;
remote-mep 2 {
action-profile rmep-defaults;
}
}
}
}
}
}
}
}
Router 3 Configuration
To configure Router 3:
1. Configure the interfaces:
[edit]
interfaces {
ge-1/0/4 {
vlan-tagging;
encapsulation flexible-ethernet-services;
unit 1 {
encapsulation vlan-bridge;
vlan-id 100;
}
}
ge-1/0/3 {
vlan-tagging;
encapsulation flexible-ethernet-services;
unit 1 {
encapsulation vlan-bridge;
vlan-id 100;
}
}
}
2. Configure the bridge domain:
[edit]
Copyright © 2012, Juniper Networks, Inc.152
Junos OS 12.1 MX Series 3D Universal Edge Routers Solutions Guide