Juniper JUNOS OS 10.4

Figure 15: Ethernet OAM with VPLS
The following are the configurations of the VPLS and CFM on the service provider routers.
Configuration of PE1 [edit chassis]
fpc 5 {
pic 0 {
tunnel-services {
bandwidth 1g;
}
}
}
[edit interfaces]
ge-1/0/7 {
encapsulation flexible-ethernet-services;
vlan-tagging;
unit 1 {
encapsulation vlan-vpls;
vlan-id 2000;
}
}
ge-0/0/0 {
unit 0 {
family inet {
address 10.200.1.1/24;
}
family mpls;
}
}
lo0 {
unit 0 {
family inet {
address 10.255.168.231/32 {
primary;
}
address 127.0.0.1/32;
}
}
}
[edit routing-instances]
vpls-vlan2000 {
Copyright © 2012, Juniper Networks, Inc.106
Junos OS 12.1 MX Series 3D Universal Edge Routers Solutions Guide