Juniper JUNOS OS 10.4 - Page 127

instance-type vpls;
vlan-id 2000;
interface ge-1/0/7.1;
route-distinguisher 10.255.168.231:2000;
vrf-target target:1000:1;
protocols {
vpls {
site-range 10;
site vlan2000-PE1 {
site-identifier 2;
}
}
}
}
[edit protocols]
rsvp {
interface ge-0/0/0.0;
}
mpls {
label-switched-path PE1-to-PE2 {
to 10.100.1.1;
}
interface ge-0/0/0.0;
}
bgp {
group PE1-to-PE2 {
type internal;
local-address 10.200.1.1;
family l2vpn {
signaling;
}
local-as 65000;
neighbor 10.100.1.1;
}
}
ospf {
traffic-engineering;
reference-bandwidth 4g;
area 0.0.0.0 {
interface all;
interface fxp0.0 {
disable;
}
interface ge-0/0/0.0;
}
}
oam {
ethernet {
connectivity-fault-management {
maintenance-domain customer-site1 {
level 5;
maintenance-association customer-site1 {
continuity-check {
interval 1s;
107Copyright © 2012, Juniper Networks, Inc.
Chapter 10: IEEE 802.1ag OAM Connectivity-Fault Management