Juniper JUNOS OS 10.4

unit 0 {
vci 100.34;
family inet {
address 30.1.1.1/24;
}
}
}
}
Router PE1
Configuration
Configure the remote interface switch.
[edit]
interfaces {
at-2/0/1 {
atm-options {
vpi 100;
}
unit 0 {
encapsulation vlan-vci-ccc;
vpi 100;
vci-range 32 end 63;
}
}
ge-5/0/0 {
unit 0 {
family inet {
address 20.1.1.1/24;
}
family mpls;
}
}
}
protocols {
rsvp {
interface ge-5/0/0.0;
}
mpls {
label-switched-path lsp1-2 {
from 10.255.171.45;
to 10.255.171.14;
}
label-switched-path lsp2-1 {
from 10.255.171.14;
to 10.255.171.45;
}
interface ge-5/0/0.0;
}
isis {
interface ge-5/0/0.0;
}
connections {
remote-interface-switch rws1 {
interface at-2/0/1.0;
transmit-lsp lsp1-2;
receive-lsp lsp2-1;
}
89Copyright © 2012, Juniper Networks, Inc.
Chapter 8: MX Series Router in an ATM Ethernet Interworking Function