bd {
domain-type bridge {
interface ge-0/0/0;
}
}
3.
Apply the filter filter-plp-configure-forwarding as an input filter to the ge-0/0/0
interface:
[edit interfaces]
ge-0/0/0 {
unit 0 {
family bridge {
filter {
input filter-plp-configure-forwarding;
}
}
}
}
Related
Documentation
• Layer 2 Firewall Filters
• Firewall Filters for Bridge Domains and VPLS Instances on page 95
• Example: Configuring Policing and Marking of Traffic Entering a VPLS Core on page 96
• Example: Configuring Filtering of Frames by MAC Address on page 98
• Example: Configuring Filtering of Frames by IEEE 802.1p Bits on page 99
Copyright © 2012, Juniper Networks, Inc.102
Junos OS 12.1 MX Series 3D Universal Edge Routers Solutions Guide
To Next Page
Loading...
