CHAPTER 33
General Safety Guidelines and Warnings
•
Definition of Safety Warning Levels on page 223
•
General Safety Guidelines for Juniper Networks Devices on page 225
•
General Safety Warnings for Juniper Networks Devices on page 226
•
In Case of an Electrical Accident on page 228
•
Preventing Electrostatic Discharge Damage to an M7i Router on page 228
Definition of Safety Warning Levels
The documentation uses the following levels of safety warnings:
NOTE: You might find this information helpful in a particular situation, or
might otherwise overlook it.
CAUTION: You must observe the specified guidelines to avoid minor injury
or discomfort to you, or severe damage to the hardware device.
WARNING: This symbol alerts you to the risk of personal injury from a laser.
WARNING: Thissymbolmeansdanger. You are in a situationthat couldcause
bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for
preventing accidents.
Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in
een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige
apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische
schakelingen betrokken risico's en dient u op de hoogte te zijn van standaard
maatregelen om ongelukken te voorkomen.
223Copyright © 2019, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
