Juniper MX960 User Manual

Reinstall Components
To reinstall the components in the router:
1. Slide each component into the chassis evenly so that it does not become stuck or
damaged.
2. Tighten the captive screws for each component.
NOTE: Make sure that all empty slots are covered with a blank panel before
operating the router.
Proceed to “Step 4: Connect the Grounding Cable” on page 13.
Copyright © 2015, Juniper Networks, Inc.12
MX960 3D Universal Edge Router Quick Start

Juniper MX960 Specifications

General

Power Supply	AC or DC
Redundancy	Yes
Operating System	Junos OS
Form Factor	Rack-mountable
Operating Humidity	5% to 90% non-condensing
Chassis Type	Modular
Slots	12
Interfaces/Ports	Varies with line cards
Operating Temperature	0°C to 40°C (32°F to 104°F)
Routing Engine	Redundant Routing Engines
Interfaces	Supports various interface modules