Juniper MX960 - Tools Required for MX960 Router Installation

Figure 1: MX960 Rack Clearance and Router Dimensions
Tools Required to Unpack and Prepare the MX960 Router for Installation
To unpack the router and prepare for installation, you need the following tools:
•
A mechanical lift—recommended
•
Phillips (+) screwdrivers, numbers 1 and 2
•
2.5 mm flat-blade (–) screwdriver
•
7/16-in. (11 mm) torque-controlled driver or socket wrench
•
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
•
Electrostatic discharge wrist strap
•
Antistatic mat
Proceed to “Step 2: Install the Mounting Hardware” on page 6.
5Copyright © 2015, Juniper Networks, Inc.
Tools Required to Unpack and Prepare the MX960 Router for Installation