Daily operation
Adjusting the product settings
Press a product button for about two seconds to view the list of settings (coffee strength, amount of water, etc.).
Permanent settings in programming mode always follow the same model.
Example:Proceed as follows to change the coffee strength for one coffee.
T
Press the COFFEE button for about two seconds.
AROMA / BALANCED
E Different settings will be available depending on the selected product: Press the
9
or
0
button to navigate the various settings.
T
Press the
y
button to access the programme item AROMA .
T
Press the
9
or
0
button to change the setting.
T
Press the w button.
T
Press the X button to return to the start screen.
SAVED
Daily operation
Switching the machine on and off
T
Place a receptacle under the dual spout.
T
Press the On/Off button Q.
RINSING
Your C8 is switched on or off.
E When the machine is switched off, the system is only rinsed if a speciality coffee has been prepared.
E If milk has been prepared before switching off, you will be prompted to carry out milk system cleaning (MILK CLEANING). After
30 seconds the switch-off process continues automatically.
Filling the water tank
Daily maintenance of the machine and hygiene when handling coffee and water are key to a perfect coffee result in the cup every time. You
should therefore change the water daily.
CAUTION
Milk, sparkling mineral water or other liquids can damage the water tank or the machine.
T
Only fill the water tank with fresh, cold water.
T
Remove the water tank and rinse it with cold water.
T
Fill the water tank with fresh, cold water and reinsert the tank.
To Next Page
Loading...
Need help?
General
