Transport and environmentally friendly disposal
Transport and environmentally friendly disposal
Transport/ Emptying the system
Keep the packaging for your C8. It should be used to protect the machine during transport.
In order to protect the C8 from frost during transport, the system must be emptied.
Precondition:The start screen is displayed.
T
Remove the milk pipe from the dual spout.
T
Place a receptacle under the dual spout.
T
Press the
0
button several times to access the third page of the start screen (MENU).
T
Press the MENU button to access the menu.
T
Press the
0
button several times until EMPTY SYSTEM is displayed.
T
Press the w button.
CONFIRM TO / EMPTYING SYSTEM
T
Remove and empty the water tank.
T
Press the w button.
EMPTYING
Steam will continue to be discharged from the dual spout until the system is empty. Your C8 is switched off.
Disposal
Please dispose of old machines in an environmentally neutral way.
H
Old machines contain valuable, recyclable materials which should be recycled. Please therefore dispose of old machines via suitable collec-
tion systems.
Technical data
Voltage 220–240V~, 50Hz
Power 1450W
Conformity mark
A
Pump pressure static, max. 15bar
Holding capacity of water tank (without filter) 1.6l
Holding capacity of bean container 200 g
Holding capacity of coffee grounds container max. 16 portions
Cable length approx. 1.1 m
Weight approx. 9.4kg
Dimensions (W×H×D) 26.0 × 32.5 × 43.7 cm
Milk system with connector HP1
Interchangeable milk spout CX1
CLARIS filter cartridge Smart+ (RFID technology) Frequency band 13.56 MHz
Max. transmission power < 1 mW
JURA Wi-Fi Connect (Wi-Fi connection) Frequency band 2.4 GHz
Max. transmission power < 100 mW
JURA type 772
Information for testers (repeat test in accordance with DIN VDE 0701-0702): The central grounding point (CGP) is located on the underside
of the machine, right next to the mains cable's connection point.
To Next Page
Loading...
