Preparation
Connecting milk
Your C8 creates fine, creamy, feather-light milk foam with a perfect consistency. The most important requirement for frothing milk is a milk
temperature of 4–8°C. We would therefore recommend using a milk cooler or a milk container.
T
Remove the protective cover from the dual spout.
T
Connect the milk pipe to the dual spout.
E The milk system of your C8 has a connector HP and an interchangeable milk spout CX.
T
Connect the other end of the milk pipe to a milk container or a milk cooler.
Establish Wi-Fi connection
Your C8 can be connected with J.O.E.®, your JURA app.
Precondition:J.O.E.® is installed on your mobile device and you have logged in to your home network. The optionally available JURA
Wi-Fi Connect is inserted into the service socket of your C8. (After the JURA Wi-Fi Connect has been inserted, the C8 must be switched
off and then on again.)
T
Press the
0
button repeatedly to come to the third page of the start screen (MENU).
T
Press the MENU button to access the menu.
T
Press the
0
button repeatedly until APP is displayed.
T
Press the w button.
CONFIRM TO CONNECT
T
Press the w button.
OK
Preparation
Basic information about preparing drinks:
Aim What to do
Change the coffee strength of a single product Press the
9
or
0
button during grinding
Change the amount for a single product Press the
9
or
0
button during preparation
Display more products Press the
0
button to come to the second page of the start screen
Prepare two speciality coffees (for coffee and espresso) Press the preparation button twice within two seconds
Change the amount, coffee strength and temperature for
any given product
Press a product button for two seconds and enter the preferred
settings
Stop preparation
Press the X button
Coffee tastes best served hot. A cold porcelain cup cools the beverage – and impairs the taste. We therefore recommend prewarming the
cups. You can purchase a JURA cup warmer from your specialised dealer.
To Next Page
Loading...
Need help?
General
