Preparing and using for the first time
Preparing and using for the first time
Setting up the machine
T
Choose a spot for your C8 which protects the machine against overheating. Ensure that the ventilation slots are not covered.
T
Place the C8 on a horizontal surface that is not sensitive to water.
Filling the bean container
The aroma preservation cover on the bean container ensures that the aroma of the beans is retained for longer.
CAUTION
Coffee beans which have been treated with additives (e.g. sugar), ground coffee or freeze-dried coffee will damage the grinder.
T
Only use roasted, untreated coffee beans to fill the bean container.
T
Remove the aroma preservation cover.
T
Fill the bean container with coffee beans and close the aroma preservation cover.
Determining the water hardness
When you use the machine for the first time, you must set the water hardness. If you know the hardness of your water, go straight to the
next section. If you do not know the water hardness, you can find this out first:
T
Hold the Aquadur® test strip supplied under running water for one second. Shake off the water.
T
Wait for about 1minute.
T
You will then be able to read the degree of water hardness from the discolouration of the Aquadur® test strip and the description on
the packaging.
First-time use
J
WARNING
If the machine is operated with a defective mains cable, there is a danger of potentially fatal electric shock.
T
Never use a machine which is damaged or has a defective mains cable.
CAUTION
Milk, sparkling mineral water or other liquids can damage the water tank or the machine.
T
Only fill the water tank with fresh, cold water.
Precondition:The bean container has been filled.
T
For machines with a plug-in mains cable: Connect the mains cable to the machine.
T
Insert the mains plug into a power socket.
T
Press the On/Off button Q to switch the C8 on.
SPRACHE DE
T
Press the
0
or
9
button until the desired language is displayed, e.g. LANGUAGE EN.
To Next Page
Loading...
Need help?
General
