16
2 Preparation
2 Preparation
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water
and seek medical attention.
T Keep children AWAY.
E While a specialty coffee or hot water is being prepared, you
can stop preparation at any time. Just press any button.
E During the grinding operation you can select the coffee
strength of single products by turning the Rotary Switch g:
; (extra-mild), ;; (mild), ;;; (normal), ;;;; (strong) or
;;;;; (extra-strong).
E During preparation, you can change the preset amount of
water by turning the Rotary Switch g or pressing the
‘<’ and
‘>’ buttons.
E You can follow the current status of preparation on the display.
E The water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4
‘Permanent settings in programming mode – Unit for amount
of water’).
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Product settings’).
Only some of the specialty coffees you can prepare are shown on
the display at any one time. As soon as you turn the Rotary Switch,
more specialty coffees are displayed in the product selector view.
The product selector view disappears automatically after 5 seconds
if no preparation is started.
The following products are displayed as standard:
U
‘Cappuccino’
U
‘Latte macchiato’
U
‘1 portion milk’
J WARNING
Ways of preparing a
beverage
To Next Page
Loading...
Need help?
General
