Jura J80 - Hot Water

21
2 Preparation
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
T Open the storage compartment cover.
T Place a cup under the coffee spout.
T Press the
‘Espresso’ button.
The grinder starts up.
‘Espresso’ is displayed.
T Turn the grinder adjustment switch to the desired position
while the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.
T Close the storage compartment cover.
The following temperatures can be selected for preparing hot water:
‘Low’, ‘Normal’, ‘X high’.
E On some models you will find a separate hot-water nozzle
under the cover of the storage compartment.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
T Place a cup under the cappuccino frother.
T Press the
‘Hot water’ button.
‘Hot water’ and the temperature are displayed.
E By pressing the
‘ < ’ or ‘ > ’ button several times (within
approximately 2 seconds) you can set the temperature to
your individual preference. This setting is not saved.
‘Hot water’, hot water flows into the cup.
Preparation stops automatically.
‘Please select product:’
appears on the display.
Hot water
J
CAUTION