22
3 Daily operation
3 Daily operation
When the JURA is switched on, it automatically prompts you to
perform the switch-on rinse. Start the switch-on rinse by pressing
the Rotary Switchk. In programming mode you can change this
setting so that the machine starts the switch-on rinse automatically
(see Chapter 4 ‘Permanent settings in programming mode –
Maintenance settings’).
Precondition:Your JURA is switched on at the power switch.
T Place a receptacle under the coffee spout.
Q T Press the On/Off button to switch the JURA on.
‘Welcome to JURA’ appears on the display. The machine
heats up.
‘Please press the Rotary Switch.’
k T Press the Rotary Switch.
The machine rinses. The operation stops automatically.
‘Please select product:’ appears on the display.
To ensure that you get many years of reliable service out of your
JURA and to guarantee the optimum coffee quality, the machine
requires daily maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
E Always empty the coffee grounds container when the machine
is switched on. This is the only way of resetting the coffee
grounds counter.
T Refit the coffee grounds container and the drip tray.
T Rinse the water tank with clean water.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Dismantle and rinse the cappuccino frother (see Chapter 5
‘Maintenance – Dismantling and rinsing the cappuccino
frother’).
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfiber cloth).
Switching on the
machine
Daily maintenance
To Next Page
Loading...
Need help?
General
