Jura J80 - Latte Macchiato and Cappuccino; Warm Milk and Milk Foam

18
2 Preparation
Your JURA can prepare a latte macchiato or cappuccino at the touch
of a button. There is no need to move the glass or cup.
Example:Proceed as follows to prepare one latte macchiato.
Precondition:Milk is connected to the cappuccino frother.
T Place a glass under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
T Press the
‘Latte macchiato’ button.
‘Latte macchiato’, the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
E There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in
programming mode (see Chapter 4 ‘Permanent settings in
programming mode – Product settings’).
Coffee preparation starts. The preset amount of water
for espresso flows into the glass. Preparation stops
automatically.
‘Please select product:’ appears on the display.
To ensure that the cappuccino frother always works properly,
you must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the cappuccino frother’).
Example:Proceed as follows to prepare milk foam.
Precondition:Milk is connected to the cappuccino frother.
T Place a cup under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
E If you want to heat the milk turn the setting wheel of the cap-
puccino frother to the Milk positionz.
T Press the
‘1 portion milk’ button.
‘1 portion milk’
As soon as the machine has heated up, ‘Please select
product:’
appears.
Latte macchiato and
Cappuccino
Warm milk and milk
foam