Jura J80 - Maintenance Settings

26
4 Permanent settings in programming mode
 O T Press the P button.
‘Maintenance status (1/6)’
 g T Turn the Rotary Switch until the program item ‘Product
settings (2/6)’
is displayed.
T Press the
‘Expert mode’ button.
‘Expert mode’
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
T Press the
‘Latte macchiato’ button.
‘Latte macchiato’
T Press the ‘Amount of milk’ button.
T Press the
‘<’ or ‘>’ button to change setting for the amount
of milk to
‘20sec.’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the
‘Volume’ button.
T Press the
‘<’ or ‘>’ button to change setting for the fill
volume to
‘1.0oz’ (40 ml).
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the
‘Next’ button.
T Press the
‘Interval’ button.
T Press the
‘<’ or ‘>’ button to change setting for the interval
to
‘40sec.’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Latte macchiato’
 O T Press the P button to exit programming mode.
‘Please select product:’
In the program item ‘Maintenance settings (3/6)’ you can make the
following settings:
U
‘Filter’
U
Activate the CLEARYL Blue filter cartridge (see Chapter 1
‘Preparing and using for the first time – Inserting and
activating the filter’).
Maintenance settings