Jura WE6 User Manual

10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet (www.jura.com). You will find interesting and
up-to-date information on your WE6 and on every aspect of coffee.
When setting up your JURA, please note the following:
U
Place the JURA on a horizontal surface that is not sensitive to
water.
U
Choose a spot for your JURA which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean
container.
T Remove the aroma preservation cover.
T Remove any dirt or foreign objects from inside the bean
container.
T Fill the bean container with coffee beans and close the
aroma preservation cover.
When you use the machine for the first time, you must set the water
hardness. If you do not know the hardness of your water, you can
find this out first. Use the Aquadur® test strips supplied with the
machine.
T Hold the test strip briefly (for 1second) under flowing water.
Shake off the water.
T Wait for about 1minute.
JURA on the Internet
Setting up the machine
Filling the bean container
NOTICE
Determining the water
hardness

Jura WE6 Specifications

General

Power	1450 watts
Dimensions	29.5 x 41.9 x 44.4 cm
Weight	10 kg
Display	TFT color display
Grinder Type	AromaG3 grinder
Pulse Extraction Process (P.E.P.)	Yes
Number of Programmable Specialties	8
Product Type	Automatic Coffee Machine
Pump Pressure	15 bar
Coffee Type	Ground Coffee
Water Tank Capacity	3 liters
Bean Container Capacity	500 grams
Brewing Chamber Capacity	5-16 grams
Coffee Grounds Container Capacity	25 portions
Voltage	220 - 240 V ~
Frequency	50 Hz
Special Features	Intelligent Water System (I.W.S.)