Jura WE6 - Cleaning the Bean Container

32
5 Maintenance
T Empty the receptacle and place it under the hot-water
nozzle and the coffee spout.
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
‘Switch open’
T Turn the switch to thex position.
‘Machine is being descaled’, the descaling operation is con-
tinued.
The operation is interrupted, ‘Switch close’.
T Turn the switch to the °position.
‘Machine is being descaled’, the descaling operation is
continued. Water flows out of the coffee spout.
‘Machine is rinsing’
The operation is interrupted, ‘Empty drip tray’.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Descaling is now complete.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These traces may negatively affect
the coffee result. For this reason clean the bean container from time
to time.
Precondition:‘Fill bean container’ is displayed.
T Switch the machine off with the On/Off button Q.
T Remove the aroma preservation cover.
T Clean the bean container with a soft, dry cloth.
T Fill the bean container with coffee beans and close the
aroma preservation cover.
Cleaning the bean
container