Jura WE6 - Espresso, Coffee and Other Specialty Coffees; Two Specialty Coffees; Permanently Setting the Amount of Water for the Cup Size

15
2 Preparation
Ristretto, espresso, coffee and special coffee are all prepared
following this model.
Example:Proceed as follows to prepare one coffee.
Precondition:The start screen is displayed.
T Place a cup under the coffee spout.
T Press the ‘Coffee’ button.
Preparation starts. ‘Coffee’ and the coffee strength are
displayed. The preset amount of water for coffee flows into
the cup.
Preparation stops automatically. Your JURA is once more
ready for use.
To prepare two specialty coffees, press the appropriate preparation
button twice (within approximately 1 second).
Example:Proceed as follows to prepare two espressi.
Precondition:The start screen is displayed.
T Place two cups under the coffee spout.
T Press the ‘Espresso’ button twice (within 1 second) to start
preparation.
‘2 espressi’, the preset amount of water flows into the cups.
Preparation stops automatically. Your JURA is once more
ready for use.
It is easy to permanently adjust the amount of water for all single
products to the cup size. Adjust the amount once as shown in the
following example. Every time you prepare a drink in the future, this
amount will be dispensed.
Example:Proceed as follows to permanently set the amount of
water for one coffee.
Precondition:The start screen is displayed.
T Place a cup under the coffee spout.
T Press and hold the ‘Coffee’ button until ‘Enough coffee?
Press button’ appears.
T Release the ‘Coffee’ button.
Preparation starts and the coffee flows into the cup.
Espresso, coffee and
other specialty coffees
Two specialty coffees
Permanently setting the
amount of water for the
cup size