Jura WE6 - Page 12

12
1 Preparing and using for the first time
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
T Press the ‘<’ or ‘>’ button to change the setting for the
water hardness.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Filter operation’
T Place a receptacle under the hot-water nozzle and under the
coffee spout.
T Remove the water tank and rinse it with cold water.
T Insert the CLEARYL Pro Smart filter cartridge into the water
tank.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Saved’ appears briefly on the display.
‘Open switch’
T Turn the switch to the§ position.
‘Filter is being rinsed’, water flows out of the hot-water
nozzle.
Rinsing of the filter stops automatically. ‘Close switch’
appears on the display.
T Turn the switch to the °position.
‘System is filling’
‘Empty drip tray’
T Empty the drip tray and put it back into the machine.
‘Machine is rinsing’
The start screen is displayed. Your WE6 is ready for use.