To Next Page

To Previous Page

1 Preparing and using for the first time

T Press the button that corresponds to the language you want,

e.g.

‘English’.

‘Saved’ appears briefly on the display to confirm the setting.

‘Water hardness’

E If you do not know the hardness of your water, you must find

this out first (see Chapter 1 ‘Preparing and using for the first

time – Determining the water hardness’).

T Press the

‘<’ or ‘>’ button to change the water hardness

setting, for example to

‘25°dH’.

T Press the

‘Save’ button.

‘Saved’ appears briefly on the display.

‘Use filter’

E Now decide whether you want to operate your JURA with or

without a CLEARYL Smart filter cartridge.

Operation with filter cartridge: go straight to the next section (see

Chapter 1 ‘Preparing and using for the first time – First-time use with

filter cartridge activation’).

Operation without filter cartridge (see Chapter 1 ‘Preparing and

using for the first time – First-time use without filter cartridge

activation’).

Milk, sparkling mineral water or other liquids can damage the water

tank or the machine.

T Only fill the water tank with fresh, cold water.

T Place a receptacle (at least 10 oz or 300ml) under the fine

foam frother and the coffee spout.

T Remove the water tank and rinse it with cold water.

T Fit the filter cartridge extension supplied on top of a CLEARYL

Smart filter cartridge.

T Open the filter holder.

First-time use with filter

cartridge activation

CAUTION

Juro WE8 User Manual

Questions and Answers: