Juro WE8 - Enable or Disable One-Off Settings; Enable and Disable Products

25
4 Permanent settings in programming mode
T Press the ‘Inactive’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘3/6’
T Press the ‘’ button to exit programming mode.
In the program item
‘3/6’/ ‘One-off settings’ you can make the
following setting:
U
‘Active’: One-off settings can be made during preparation (e.g.
coffee strength or amount of water).
U
‘Inactive’: One-off settings cannot be made during
preparation. The product is prepared according to the
settings in programming mode (
‘3/6’ / ‘Expert mode’).
Example:Proceed as follows to disable one-off settings during prep-
aration.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘3/6’ is displayed.
T Press the
‘One-off settings’ button.
‘One-off settings’
T Press the ‘Inactive’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘3/6’
T Press the ‘’ button to exit programming mode.
In the program item
‘3/6’/ ‘Lock/enable’ you can enable or disable
each product individually.
Example:For example, you can disable the preparation of hot water.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘3/6’ is displayed.
T Press the
‘Lock/enable’ button.
‘Lock/enable’
E The lock symbol beside the product name indicates whether
the product is enabled or disabled. If the lock is closed, the
product is disabled.
T Press the
‘ > ’ button until the product ‘Hot water’ is
displayed.
Enable or disable one-off
settings
Enable and disable
products