Juro WE8 - Query Counter Readings and Version

28
4 Permanent settings in programming mode
T Press the button that corresponds to the language you want,
e.g.
‘Deutsch’.
‘Gespeichert’ appears briefly on the display.
‘4/6’
T Press the ‘’ button to exit programming mode.
In the program item
‘6/6’ you can view the following information.
U
‘Product counter’: Number of prepared specialty coffees and
hot water
U
‘Day counter’: Number of prepared specialty coffees and hot
water. This counter can be reset to zero.
U
‘Maintenance counter’: Number of maintenance programs
performed (cleaning, descaling etc.)
U
‘Version’: Software version
Example:Proceed as follows to reset the day counter.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘6/6’ is displayed.
T Press the
‘Day counter’ button.
T Press the
‘’ button.
‘Delete the day counter?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
‘6/6’
T Press the ‘’ button to exit programming mode.
Query counter readings
and version