14
1 Preparing and using for the first time
T Place one receptacle under the coffee spout and another
under the fine foam frother.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
‘System is filling’, the system fills up with water.
‘Machine is heating’
‘Machine is rinsing’
, the system is rinsed.
The rinse stops automatically. Your JURA is ready for use.
E The start screen shows the products you can prepare. Press
the
‘>’ button to display more products.
Your JURA creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 39–46 °F (4–8 °C). We would therefore
recommend using a Cool Control Basic milk cooler or a vacuum milk
container.
T Remove the protective cover from the fine foam frother.
T Connect the milk pipe to the fine foam frother.
T Connect the other end of the milk pipe to a milk container
or a Cool Control Basic milk cooler.
Connecting milk
To Next Page
Loading...