32
5 Maintenance
T Dismantle the fine foam frother into its individual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 8.5 oz (250 ml) cold water and 1 capful of JURA
milk system cleaner. Then rinse the parts thoroughly.
T Re-assemble the fine foam frother.
E Ensure that all individual parts are correctly and firmly
connected to ensure optimum operation.
T Firmly attach the fine foam frother to the Connector
System
©
.
Your JURA no longer has to be descaled if you are using the CLEARYL
Smart filter cartridge. If you did not insert the filter cartridge the first
time you used the machine, you can do this now as follows.
T Remove and empty the water tank.
T Fit the filter cartridge extension supplied on top of a CLEARYL
Smart filter cartridge.
T Open the filter holder.
T Insert the filter cartridge with its extension into the water
tank.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Saved’ appears briefly on the display.
‘Filter is beingrinsed’, the water flows directly into the drip
tray.
Rinsing of the filter stops automatically.
E If the filter is active, this is indicated by a blue filter symbol at
the bottom of the display.
Inserting the filter
To Next Page
Loading...
Need help?
General