Juro WE8 User Manual

27
4 Permanent settings in programming mode
The harder the water is, the more frequently the JURA needs to be
descaled. It is therefore important to set the water hardness
accurately.
The water hardness was set when the machine was first used. You
can change this setting at any time.
The total water hardness can be adjusted on a continuous scale
between 1°dH and 30°dH.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘5/6’ is displayed.
T Press the
‘Water hardness’ button.
‘Water hardness’
T Press the ‘<’ or ‘>’ button to change the setting for the
water hardness.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘5/6’
T Press the ‘’ button to exit programming mode.
Example:Proceed as follows to change the unit for the amount of
water from ‘ml’ to ‘oz’.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘4/6’ is displayed.
T Press the
‘Units’ button.
‘Units’
T Press the ‘oz’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘4/6’
T Press the ‘’ button to exit programming mode.
Example:Proceed as follows to change the language from
‘English’
to
‘Deutsch’.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘4/6’ is displayed.
T Press the
‘Choose language’ button.
‘Choose language’
E To display more languages, press the ‘ > ’ button (bottom
right).
Setting the water
hardness
Unit for amount of water
Language

Juro WE8 Specifications

General

Brand	Juro
Model	WE8
Category	Coffee Maker
Language	English