48
PLAYBACK
– Repeat playback –
This unit is capable of 3 types of repeat playback.
The repeat playback function is set via the REPEAT MODE item of the SYSTEM (1/2) menu.
TAPE END
VIDEO END
Playback
INDEX
Rewind
Index signal
Beginning of tape End of tape
Index signal
–––SYSTEM[ 1 / 2 ] –––
STL / F . ADV 2ND
BACKUP REC T I ME OFF
LONG PAUSE T I ME 5MI N
LONG PAUSE MODE F . ADV
INDEX
W
RITE ON
REPEAT MODE BLANK
NEXT PAGE
PAGE BACK
SYSTEM (1/2) menu
Setting
REPEAT MODE item of the SYSTEM (1/2) menu
OFF :No repeat playback.
INDEX :Repeat playback between positions where index sig-
nals are recorded.
VIDEO END :Repeat playback from the beginning of the tape to
the position where video signal recording ends.
TAPE END :Repeat playback from the beginning to the end of
the tape.
Operation
1.
Press the REW button and rewind the tape to the be-
ginning.
2.
Press the PLAY button to begin replay.
¥ When it reaches the position set at the REPEAT MODE menu
item, the tape rewinds and plays back again.
To abort the repeat playback function, press the STOP
button.
Repeat operation
INDEX repeat playback
• If no index signal is de-
tected during playback,
the tape will run till the
end. If no index signal is
detected during rewind,
the tape will rewind till the
beginning.
• If the interval between in-
dex signals is less than 1
minute, the function may
not work well.
Memo
If there is dust adhered
to the head, repeat play-
back may not work well.
BR-DV3000U_p02-49 06.8.24, 2:02 PM48
To Next Page
Loading...
Need help?
General
