EasyManua.ls Logo

JVC CA-HXD77

JVC CA-HXD77
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Unique DVD/VCD Operations (see pages 2oto 22)
Seleeting the Sound Traek:
On some DVD videos, you cannot change audio languages
while playing back.
Special Picture Playback:
During slow-motion playback, no sound will be
reproduced.
While zoomed in, the picture may look coarse.
. You cannot use frame-by-frame playback for DVD-VR.
AdvancedDisc Operations (seepages23 to25)
Programming the Playing Order--Program Play:
While programming steps...
If you try to program a disc number on which the System
has detected no disc is loaded, " _ " appears on the TV
screen.
Your entry will be ignored if you have tried to prograln an
item number that does uot exist on the disc (Rn" example,
selecting track 14 on a disc that only has 12 tracks). Such
entries are ignored.
When you enter the group uulnber for SVCD/VCD/CD
which is not in the current tray, the Systeln will ignore these
entries during playback.
. You cannot use Program Play and Random Play for
DVD-VR and JPEG discs.
If you try to add a 100th track, "FULL" appears on the display.
The program contents will be erased when...
You unplug the AC power cord.
You open the disc tray currently selected (regardless of the
play mode).
Playing at Randmn--Random Play:
. Random Play cannot be used on some DVD discs.
On-ScreenDiscOperations (seepages26to 321
Operations Using the On-screen Bar:
. A-B Repeat:
For DVD Video, A-B Repeat is possible only within the
same title.
For SVCD/VCD/CD, A-B Repeat is possible only within
the same track.
Operations on the control Sereen:
For DVD-VR playback...
Original Program: The System can play back the
original picture in the recorded order.
Play List: The System can play back the play list edited
by the recording equipment. The control screen for the
play list appears only when the disc has the play list.
Resume is not available.
For details about DVD-VR format and play list, refer to
the manual of the recording equipment.
For JPEG files playback...
It is recommended that you record a file at 640 x 480
resolution. (If a file has been recorded at a resolution of
more than 640 x 480, it will take a long time to be
shown.)
This System can play only baseline JPEG files*.
Progressive JPEG files* or lossless JPEG files* cannot
be played.
_: Baseline JPEG format: Used for digital cameras,
web, etc.
Progressive JPEG format: Used for web.
Lossless JPEG format: An old type and rarely used
now,
. This unit may not play back JPEG files properly which are
recorded by the devices other than digital still camera.
. During Slide-show playback, zoom cannot be operated.
TimerOperations(seepages 33 and 34)
Setting the Timer:
. When you select "CD" for the playback source, playback
starts from the beginning of the current disc when timer is
activated.
When you unplug the AC power cord or ifa power failure
occurs, the timer will be canceled. You need to set the
clock first, then the timer again.
. If you set DVD Video as the source, Daily Timer may not
work correctly.
set upMenuOperations(seepages 35toa8)
LANGUAGE Set up Menu:
. When the language you have selected for MENU
LANGUAGE, AUDIO LANGUAGE, or SUBTITLE is
not recorded on a disc, the original language is used as the
initial language.
PICTURE Set up Menu--MONITOR TYPE:
Even if"4:3 PS" is selected, the screen size may become
4:3 letter box with some DVD Videos. This depends on
how the discs are recorded.
When you select "16:9" for a picture whose aspect ratio is
4:3, the picture slightly changes due to the process for
converting the picture width.
AUDIO Set up Menu--DOWN MIX:
This setting is not effective when DTS multi-channel
software is played back.
OTHERS Set up Menu--ON SCREEN GUIDE:
The set up menu and on-screen bar will be displayed (and
recorded) even though this fimction is set to "OFF."
Subtitles and the information for zooming in always appear
on the display regardless of this setting.
41

Related product manuals