Changing the time information
You can change the time informatkm in the on-screen bar
and the display window on the main unit.
1 Display the on-screen bar with the pull-down menu.
2 Make sure _ is selected (highlighted).
3 Change the time indication.
RepeatPlay
. See also page 25.
1 While playing a disc (without PBC {)r SVCD/VCD),
display the on-screen bar with the pull-down menu.
2 Select _.
3 Display the pop-up window.
TOTAL • For DVD Video: Elapsed playing
time of the title/group.
. For CD/SVCD/VCD: Elapsed time
of disc.
T.REM • For DVD Video: Remaining time of
the title/group.
• For CD/SVCD/VCD: Remaining
time of disc.
TIME s Elapsed playing time of the current
chapter/track.
REM* Remaining time of the current
chapter/track.
• Not available for DVD-VR.
To erase the on-screen bar
4 Select the repeat mode you want.
ALL** Repeats all discs.
A-B Repeats a desired portion (see
page 29).
TITLE Repeats the current title.
GROUP Repeats the current group.
DISC** Repeats the disc.
CHAPTER Repeats the current chapter.
TRACK* Repeats the current track.
OFF Cancels Repeat Play.
* During Program Play or Random Play, "STEP"
appears.
** For DVD Video, ALL (REPEAT ALL) and D1SC
(REPEAT 1 DISC) may not be available depending on
the disc.
* Repeat modes depend on the current playback disc.
Ret)r to page 25.
5 Finish the setting.
Pop-up window goes off.
To cancel Repeat Play, select "OFF" in step 4.
To erase the on-screen bar
28
To Next Page
Loading...
