USBOperations:
Unable to play hack through the USB connection.
USB connection and setting is incorrect (see page 14).
The sound through the USB connection stops.
Noise and static electricity may stop the sound through the
USB connection. In this case, do the following operations:
* Discounect and connect the USB cable agaiu
* Restart the music soltwam on your PC
* Turn off and on the system
Timer operations:
Daib' Timer does not work.
The System has been turned on when the on-time comes.
Timer starts working only when the System is turned off.
If you still have a problem, reset the System.
While in standby...
Press and hokl until the display flashes.
The factory default settings are restored and all the settings you have lnade are
erased.
DIGITAL AUDIO
OUTPUT
Playback disc
DVD VIDE()
with 48 kHz, 16/20/24 bit
Linear PCM
with 96 kHz, Linear PCM
with Dolby Digital
with DTS Digital Surround
DVD-R/-RW in DVD-VR format
with 48 kHz, 16/20/24 bit
Linear PCM
with Dolby Digital
SVCD, VCD, CD
CD with DTS Digital Surround
MP3/WMA disc
Output Signals
STREAM/PCM DOLB¥ DIGITAL/PCM PCM ONLY
48 kHz, 16 bit Linear PCM *]
48 kHz, 16 bit Linear PCM
Dolby Digital bitstream 48 kHz, 16 bit Linear PCM
DTS bitstream 48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM*
Dolby Digital bitstream 48 kHz, 16 bit Linear PCM
44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
DTS bitstream 44.1 kHz, 16 bit Linear PCM
No output
While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the
DIGITAL OUTPUT (OPTICAL) terminal if the discs are not copy-protected.
43
To Next Page
Loading...
