11
ENGLISH
○○○○○○○○
Listening to the radio
1
Select the Tuner
2
Select the band (FM/AM)
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
3
Start searching for a station
“Auto Search” begins.
When a station is received, searching stops.
To stop searching, press the same button.
To tune in to a station manually
In step
3
above...
Radio Operations
Activate “Manual
Search.”
Select station
frequencies.
SOURCE
HoldHold
What information is shown on the display
The following information are shown commonly for tuner operations.
• If you press DISP on the control panel, the display will show the different information or
different screens (see page 14).
OK
BAND
FM1 FM2
FM3AM
Station Frequency
(with its icon)
Current band
then
Programme Type
(PTY code: see page 20)
Preset number if any
Station name (PS: see page 15)
(with its icon)
see page 12.
08-14_KD-SHX701_f.p65 4/1/04, 1:16 PM11
To Next Page
Loading...
