13
ENGLISH
(in this example, of 92.5 MHz)
(in this example, FM1)
OK
BAND
○○○○○○○○○
Storing stations in memory
You can preset 6 stations for each band.
FM station automatic presetting—SSM
(Strong-station Sequential Memory)
• This is only for FM bands.
1
Select the FM band (FM1 – FM3) you
want to store FM stations into.
2
While tuning in to an FM station...
The Main Menu appears on
the display.
3
Move the cursor to “MODE” on the
Main Menu.
4
Enter the FM MODE Menu.
5
Select “SSM.”
6
Start SSM.
Local FM stations with the
strongest signals are searched
and stored automatically in the
selected FM band.
Manual presetting
Ex. Storing an FM station of 92.5 MHz into
the preset number 3 of the FM1 band.
1
2
Tune in to a station
3
Display the Preset Station List of the
selected band.
• Station frequencies or station names (PS:
see page 15) of the preset stations are
shown on the list.
4
Select a preset number.
• If the current band is FM, you can move
to the lists of the other FM bands by
pressing 4/¢ (
/ ).
5
Store the station selected in step
2
.
OK
BAND
FM1 FM2
FM3AM
OK
BAND
FM1 FM2
FM3AM
Hold
OK
BAND
Hold
MENU
OK
BAND
Cursor
(Select “3” in this example).
08-14_KD-SHX701_f.p65 4/1/04, 1:16 PM13
To Next Page
Loading...
Need help?
General
